| Course Unit Title | Course Unit Code | Type of Course Unit | Level of Course Unit | Year of Study | Semester | ECTS Credits |
|---|---|---|---|---|---|---|
| Maintenance Practices I | UGM210 | Compulsory | Bachelor's degree | 2 | Spring | 4 |
Name of Lecturer(s)
Prof. Dr. Mehmet KAYA
Associate Prof. Dr. Sinan FİDAN
Lecturer Şahin AYDIN
Lecturer Dr. Barış ÖNEN
Learning Outcomes of the Course Unit
1) Apply safety precautions.
2) Take responsibility for workshop Applications.
3) Recognize instruments / kits.
4) Comment on fits and clearances.
5) Express the purpose and usage of part tags and warning cards.
6) Express removal/installation of aircraft components.
7) Carry out measuring and inspections correctly
8) Use Maintenance Manuals and other Manuals
9) Carry out selection of correct equipment and tools
10) Makes riveted assembly and disassembly, knows riveting tools.
11) It can perform maintenance and checks of pipes and connections
12) Knows the control and testing of springs.
13) Carries out the controls of the beds.
14) Explain the functions of transmissions.
15) Explain the functions of control cables.
Program Competencies-Learning Outcomes Relation
| Program Competencies | ||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | ||
| Learning Outcomes | ||||||||||||||||||||
| 1 | Middle | Middle | High | High | No relation | High | High | High | High | Low | High | No relation | High | High | Middle | Middle | High | High | Middle | |
| 2 | High | Middle | High | High | Low | High | High | High | High | Low | High | Low | High | High | Middle | Middle | High | High | Middle | |
| 3 | High | High | High | High | Low | High | High | High | High | Low | High | Middle | High | High | Middle | Middle | High | High | High | |
| 4 | High | High | Low | Middle | High | Middle | High | High | Low | High | Low | Low | High | Low | Middle | High | High | Middle | High | |
| 5 | High | Low | Middle | Low | Middle | Middle | Low | Middle | High | High | Middle | Low | High | High | Middle | High | Middle | Middle | High | |
| 6 | High | Middle | High | High | High | High | High | High | High | High | High | High | High | High | High | High | High | High | High | |
| 7 | High | Middle | Middle | High | High | Middle | Middle | High | Middle | High | Low | Middle | High | High | High | Middle | Middle | Low | High | |
| 8 | High | Middle | Middle | Low | High | High | Middle | High | High | High | Middle | Low | High | High | High | High | High | High | High | |
| 9 | High | Middle | Middle | High | Low | High | Middle | High | High | Low | Middle | Middle | High | High | High | High | High | High | High | |
| 10 | High | Middle | Middle | High | Middle | Low | Middle | Middle | Middle | High | Low | Middle | High | High | Middle | No relation | High | No relation | High | |
| 11 | High | Middle | Middle | Low | Low | Low | Middle | Low | Low | Low | Low | Low | High | High | Low | High | Middle | Middle | High | |
| 12 | High | Middle | Middle | Low | Low | Low | Middle | Low | Low | Low | Low | Low | High | High | Low | Low | Middle | Middle | High | |
| 13 | High | Middle | Middle | Low | Low | Low | Middle | Low | Low | Low | Low | Low | High | High | Low | Low | Middle | Middle | High | |
| 14 | High | Middle | Middle | Low | Low | Low | Middle | Low | Low | Low | Low | Low | High | High | Low | Low | Middle | Middle | High | |
| 15 | High | Middle | Middle | Low | Low | Low | Middle | Low | Low | Low | Low | Low | High | High | Low | Low | Middle | Middle | High | |
Mode of Delivery
Face to Face
Prerequisites and Co-Requisites
None
Recommended Optional Programme Components
Not Required
Course Contents
Riveting; Riveted joints, rivet spacing and pitch; Tools used for riveting and dimpling; Inspection of riveted joints. Pipes and Hoses; Bending and belling/flaring aircraft pipes; Inspection and testing of aircraft pipes and hoses; Installation and clamping of pipes. Springs; Inspection and testing of springs. Bearings; Testing, cleaning and inspection of bearings; Lubrication requirements of bearings; Defects in bearings and their causes. Transmissions; Inspection of gears, backlash; Inspection of belts and pulleys, chains and sprockets; Inspection of screw jacks, lever devices, push-pull rod systems. Control Cables; Swaging of end fittings; Inspection and testing of control cables; Bowden cables; aircraft flexible control systems.
Weekly Schedule
1) Safety precautions,aircraft and workshop aspects of safe working practices including precautions to take when working with electricity, gases especially oxygen, oils and chemicals Also, instruction in the remedial action to be taken in the event of a fire or another accident with one or more of these hazards including knowledge on extinguishing agents2) Safety precautions,aircraft and workshop aspects of safe working practices including precautions to take when working with electricity, gases especially oxygen, oils and chemicals Also, instruction in the remedial action to be taken in the event of a fire or another accident with one or more of these hazards including knowledge on extinguishing agents
3) Care of tools, control of tools, use of workshop materials
4) Care of tools, control of tools, use of workshop materials
5) Dimensions, allowances and tolerances, standards of workmanship; Calibration of tools and equipment, calibration standards
6) Common hand tool types;common power tool types;operation and use of precision measuring tools;lubrication equipment and methods ,operation, function and use of electrical general test equipment
7) Common hand tool types;common power tool types;operation and use of precision measuring tools;lubrication equipment and methods ,operation, function and use of electrical general test equipment
8) Midterm examination/Assessment
9) Common hand tool types;common power tool types;operation and use of precision measuring tools;lubrication equipment and methods ,operation, function and use of electrical general test equipment
10) Avionic general test equipment,operation, function and use of avionic general test equipment
11) Drill sizes for bolt holes, classes of fits;common system of fits and clearances,schedule of fits and clearances for aircraft and engines;limits for bow, twist and wear;standard methods for checking shafts, bearings and other parts
12) Drill sizes for bolt holes, classes of fits;common system of fits and clearances,schedule of fits and clearances for aircraft and engines;limits for bow, twist and wear;standard methods for checking shafts, bearings and other parts
13) Continuity, insulation and bonding techniques and testing;use of crimp tools: hand and hydraulic operated;testing of crimp joints;connector pin removal and insertion;co-axial cables: testing and installation precautions;wiring protection techniques: cable looming and loom support, cable clamps, protective sleeving techniques including heat shrink wrapping, shielding
14) Continuity, insulation and bonding techniques and testing; use of crimp tools: hand and hydraulic operated;testing of crimp joints;connector pin removal and insertion; co-axial cables: testing and installation precautions; wiring protection techniques: cable looming and loom support, cable clamps, protective sleeving techniques including heat shrink wrapping, shielding
15) Continuity, insulation and bonding techniques and testing; use of crimp tools: hand and hydraulic operated;testing of crimp joints;connector pin removal and insertion; co-axial cables: testing and installation precautions; wiring protection techniques: cable looming and loom support, cable clamps, protective sleeving techniques including heat shrink wrapping, shielding
16) Final examination
Recommended or Required Reading
Planned Learning Activities and Teaching Methods
Assessment Methods and Criteria
Contribution of Practices to Course Grade |
60% |
|---|---|
Contribution of Final Examination to Course Grade |
40% |
Total |
100% |
Language of Instruction
Turkish
Work Placement(s)
Not Required