| Course Unit Title | Course Unit Code | Type of Course Unit | Level of Course Unit | Year of Study | Semester | ECTS Credits |
|---|---|---|---|---|---|---|
| Cnc Programming | OMP244 | Compulsory | Associate degree | 2 | Spring | 3 |
Name of Lecturer(s)
Assistant Prof. Dr. Serkan AKTAŞ
Learning Outcomes of the Course Unit
1) .
2) .
Program Competencies-Learning Outcomes Relation
| Program Competencies | |||||||||||||||||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 | ||
| Learning Outcomes | |||||||||||||||||||||
| 1 | Middle | Middle | Middle | High | Middle | High | High | High | Middle | Low | No relation | No relation | Low | No relation | Low | Low | No relation | No relation | Middle | No relation | |
| 2 | Middle | Middle | Middle | High | Middle | High | High | High | Middle | Low | No relation | No relation | Low | No relation | Low | Low | No relation | No relation | Middle | No relation | |
Mode of Delivery
Face to Face
Prerequisites and Co-Requisites
None
Recommended Optional Programme Components
Computer-AidedManufacture
Course Contents
CNC machine tools, application areas, structure of CNC machine tools, introduction and programming of CNC lathes, absolute and incremental programming, M and G codes in lathes, Linear and polar interpolation in lathes, external and internal turning operations, Turning cycles, Introduction of CNC turning simulation program, structure of CNC milling machine, Absolute and incremental programming, M and G codes in milling, Linear and polar interpolation in milling, contour, face, pocket, groove, hole milling operations, milling cycles, Introduction of CNC milling simulation program
Weekly Schedule
1) Description of CNC Lathe, types and selection of tools2) Coordinate systems, G and M codes
3) Structure of CNC Program
4) Cycles rough and finish turning
5) Cycle of drilling, cycle of grooving
6) Cycle of threading
7) Work/tool offset, program writing, simulation and turning of sample workpiece in CNC Lathe
8) Midterm examination/Assessment
9) Tool holders used in CNC milling machine, workpiece fixing
10) NC codes for programming, Linear and polar interpolation, Tool compansation- G40,G41,G42
11) Cycle of drilling-G81,G82,G83
12) Cycle of tapping-G84
13) Cycle of boring- G85, G86, G87, G88
14) Sub-programming
15) Work/tool offset, program writing, simulation and milling of sample workpiece in CNC Milling Machine
16) Final examination
Recommended or Required Reading
Planned Learning Activities and Teaching Methods
1) Lecture
2) Question-Answer
3) Discussion
4) Drill and Practice
5) Demonstration
6) Modelling
7) Group Study
8) Lab / Workshop
9) Project Based Learning
Assessment Methods and Criteria
Contribution of Semester Studies to Course Grade |
50% |
|||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
||||||||||||
Contribution of Final Examination to Course Grade |
50% |
|||||||||||
Total | 100% | |||||||||||
Language of Instruction
Turkish
Work Placement(s)
Not Required